PDC Bit
Ẹya-ara ti PDC bit
1, Aṣọ fun liluho alabọde si alabọde-lile formations.
2, Evolute asymmetrical cutter cutter design and balanced bit load that bit whirl ti wa ni idaabobo.
3, Idaabobo gage apapo ati apẹrẹ iyipo kekere mu iwọn ilaluja dara si.
4, Awọn abajade iwọntunwọnsi hydraulic hydraulic CFD ni mimọ bit ti o dara julọ ati yiyọ gige.
5, Imudapọ iṣamulo ti iṣẹ ṣiṣe giga PDC compacts significantly pẹ igbesi aye bit
6, Awọn iṣiro nozzle ti o ga julọ ati / tabi awọn ebute oko oju omi ti o wa titi lati ṣe iṣẹ mimọ ti o dara julọ, itutu agbaiye ati yiyọ kuro.awọn ibeere pẹluAwọn ṣiṣan hydraulic ti o wa.Gbigba fun awọn oṣuwọn sisan ti o ga julọ pẹlu ilosoke diẹ ninu titẹ fifa.
Ẹya-ara: Awọn okuta iyebiye jẹ impregnated ninu matrix lẹhin awọn gige PDC
Anfani: Alekun aworan ti gbẹ iho ni awọn ohun elo abrasive
| Bit Iru | 6” | 8-1/2” | 8-1/2” | 12-1/4” | Bit Iru | 17-1/2 "GM1606T |
| IDC koodu | M423 | M432M332 | M323 | M432 M332 | IDC koodu | M323 |
| Abẹfẹlẹ | 5 | 6 | 8 | 6 | Abẹfẹlẹ | 6 |
| Iwọn gige (mm) | Φ13 MM | Φ16 MM | Φ13 MM | Φ16MM | Iwọn gige (mm) | Φ16MM;Φ13MM |
| Nozzle Qty/Iru | 5 | 13.2 | 9.6 | 30.78 | Olupin Qty | Φ16×58;Φ13×81 |
| Nozzle Qty/Iru | 3NZ | 6NZ | 4NZ | 6NZ | Nozzle Qty/Iru | 8NZ |
| Iwọn Gigun | 1.5” | 2.2” | 2” | 2.5” | Gigun Iwọn (mm) | 110 |
| Asopọmọra | 3-1/2” API REG | 4-1/2” API REG | 4-1/2” API REG | 6-5/8” API REG | Asopọmọra | 7-5/8” API REG |
| Ṣe Torque (KN.m) | 10.4 ~ 11.4 | 24.1 ~ 26.5 | 24.1 ~ 26.5 | 51.7 ~ 56.9 | NW/ GW(KG) | 338/388 |
| Iyara Yiyi (rpm) | 60-260 | 60-260 | 60-260 | 60-260 | Iwon Nozzle (inch) | 10/32 |
| Ìwọ̀n lórí Bit(KN) | 8-50 | 20-100 | 20-100 | 30-140 | Iyara Yiyi (Rpm) | 60-260 |
| O pọju.WOB(KN) | 90 | 130 | 130 | 180 | Òwú Lori Bit(KN) | 30-200 |
| Oṣuwọn Sisan (lps) | 10-30 | 22-35 | 22-35 | 38-70 | O pọju.WOB (KN) | 240 |
| Oṣuwọn Sisan (lps) | 45-80 | |||||
| Loke ni awọn iwọn deede fun itọkasi rẹ.Iwọn le jẹ adani gẹgẹbi fun ibeere rẹ. | ||||||
